Broseley 20B Spécifications télécharger pdf (Page 4)

Health & Safety

Special care must be taken when installing the stove such that the requirements of the

Health and Safety at Work Act are met.

Installation

This appliance MUST be installed and commissioned by a HETAS registered installer in

England and Wales and a fully qualified Heating Engineer in Scotland and Ireland.

Handling

Adequate facilities must be available for loading, unloading and site handling.

Fire Cement

Some types of fire cement are caustic and should not be allowed to come into contact with

the skin. In case of contact wash immediately with plenty of water.

Asbestos

This stove contains no asbestos. If there is a possibility of disturbing any asbestos in the

course of installation then please seek specialist guidance and use appropriate protective

equipment.

Metal Parts

When installing or servicing this stove care should be taken to avoid the possibility of

personal injury.

CO Alarms

Building regulations require that whenever a new or replacement fixed solid fuel or

wood/biomass appliance is installed in a dwelling an audible carbon monoxide alarm must

be fitted in the same room as the appliance. Further guidance on the installation of the

carbon monoxide alarm is available in BS EN 50292:2002 and from the alarm

manufacturer’s instructions. Provision of an alarm must not be considered a substitute for

either installing the appliance correctly or ensuring regular servicing and maintenance of

the appliance and chimney system.

Fire Guards

When using the stove in situations where children, aged and/or infirm persons are present

a fireguard must be used to prevent accidental contact with the stove. The fireguard

should be manufactured in accordance with BS 6539.

Aerosol Sprays

Do not use an aerosol spray on or near the stove when it is alight.

Operating Tool & Gloves

Always use the operating tool and glove provided when handling parts likely to be hot

when the stove is in use.

JUL13GB Issue 1 4

1 2 3 4 5 6 7 8 9 ... 28 29

Pas de commentaire

Broseley 20B Spécifications Page 4